Impedance Spectrum Measurement System

Impedance spectrum measurement system, Labview program was developed to communicate with a HP 4276 LCZ Meter (from Prof. Lawrence Hmurcik) through a GPIB cable (Figure 1) and an impedance spectrum can be obtained through this system. In the study of a fuel cell, the overvoltages (voltage losses) can be estimated through the analysis of the impedance spectra as shown in Figure 2

research and tools 1research and tools 2
Figure 1. Impedance spectrum
researchresearch 2
Figure 2. Impedance spectra from a hydrogen fuel cell at room temperature

Fuel Cell Testing System

Fuel Cell testing system, a fuel cell testing system was set up with a Labview program, a miniLab 1008 DAQ board, and a PC (see Figure 3). In addition, a heating tape, a transformer, a thermocouple, and a relay are used to control the temperature of a fuel cell. Therefore, the voltage-current and power-current curves (see Figures 4 and 5) can be measured.
research and tools 3research and tools 4
Figure 3. Fuel cell testing system
voltage current curvesvoltage current curves 1
Figure 4. The voltage-current curves at 230C (left) and 650C (right)
power current curvesvoltage current curves 650c
Figure 5 the power-current curves at 230C and 650C

Potentiostat System

Potentiostat system, a Pine WaveNow Potentiostat is used to acquiring qualitative information about electrochemical reactions (see Figure 6). Cyclic voltammetry is the main method through this system to study the thermodynamics of redox processes and the kinetics of heterogeneous electron-transfer reactions.
potentiostat system
Figure 6 potentiostat system

Surface Characterization System

Surface characterization system, a Secondary Ion Mass Spectrometry (SIMS) (see Figure 7) was used to analyze the composition of solid surfaces, including the surface of the fuel cell electrode. SIMS is the most sensitive surface analysis technique, being able to detect elements present in the parts per billion range.
secondary ion mass spectrometrysecondary ion mass spectrometry
Figure 7 Secondary Ion Mass Spectrometry
In addition, there are one Nikon stereomicroscope (see Figure 8) and one mass selective detector (see Figure 9).
Nikon stereomicroscope
Figure 8 Nikon stereomicroscope
HP mass selective detector
Figure 9 HP mass selective detector


  1. LabVIEW
  2. SCAPS
  3. HOMER
You are viewing the old version of UB website. Click here to switch to theNew Version!